Considered the most efficient mechanically cleaned filter on the market, the Eaton DCF-Series is ideal for highly viscous, abrasive, or sticky liquids. The DCFs operate at a consistently low differential pressure and deliver simple, reliable operation in which a low initial investment is a key driving factor.
Applications:
DCF mechanically cleaned filters are designed to address the challenges of increasing environmental pressures, loss of valuable produce, and operator safety.
DCF 400 | DCF 800 | DCF 1600 | |
Single Unit Weight | 35 lbs (16 kg) | 75 lbs (34 kg) | 215 lbs (97.5 kg) |
Service Height | 61.25 in (1,556 mm) | 69.25 in (1,760 mm) | 102 in (2,591 mm) |
Total Volumetric Capacity | 0.94 gal (3.5 liters) | 3.9 gal (14.8 liters) | 11 gal (41.6 liters) |
Purge Chamber Capacity | 0.06 gal (0.23 liters) | 0.24 gal (0.91 liters) | 0.66 gal (2.5 liters) |
Filtration Surface Area | 112 in², 722 cm² | 264 in², 1,703 cm² | 610 in², 3,935 cm² |
Flow Rate Range at 100μm | 2–15 gpm, 0.45–3.4 m³/hr | 20–60 gpm, 4.5–13.6 m³/hr | 60–180 gpm, 13.6–40.8 m³/hr |
Temperature, maximum | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) |
Pressure, maximum | 300 psi (21 bar) | 300 psi (21 bar) | 150 psi (10.5 bar) standard |
Service Requirements Air for Actuator Drive, min |
400/800 = 60 psi at 5 cfm (4 bar @ 8.5 m³/min) 1600 = 80 psi at 5 cfm (5 bar @ 8.5 m³/min) | ||
Electrical for Controllers | Control for all three models, automated only, 110/220V, 50/60 Hz, single phase |