Certifications and compliances

NEC and CEC

• Wet Locations, Type 4X, IP66
  

UL standards

• UL1598 Luminaires, UL1598A Marine
  

CSA Standard

• cUL Listed to CSA Standard CSA C22.2 No. 250
  

IEC Standard

• CE

DesignLights Consortium® Qualified†

*Download complete technical specs to see temperature code table and full certifications data
†Refer to www.designlights.org for full listing details

• Nine models from 3,000 lumens to 25,000 lumens for areas with mounting heights of 8-60 feet
• Die cast aluminum heat sink increases surface areas and improves airflow, optimizing both LED and driver life. The PVM LED has a rated life of 60,000 hours at 55ºC ambient, and its economic life ranges from 7 to 20 years.
• Energy-efficient technology - up to 77% energy savings over HID fixtures
• Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break - greatly reduces the risk of premature failure
• Custom Type V, Type III, and Type I optics distribute the light where it is needed most and can help reduce the number of fixtures required for certain lighting applications
• Contractor-friendly PVM LED utilizes the same mounting modules as our legacy HID luminaires, simplifying installation and reducing costs in retrofit projects
• Mounting Styles - Pendant mount; cone pendant mount; flexible pendant mount; ceiling mount; wall mount; stanchion 25° mount; stanchion straight mount
• Cool white standard (5000K, 70 CRI); warm white (3000K, 80 CRI) and neutral white (400K, 70 CRI) optional
• Instant illumination and restrike
• Cold temperature operation/no warm-up required
• Contains no mercury or other hazardous substances
• Operating ambient: -40°C to 65°C (VMV3L-VMV11L models); -40°C to 55°C (VMV13L-VMV25L models)
• Option for redundancy in drivers with multiple series circuits connected to each driver to avoid complete loss of illumination

• Lamp housing and adapter – die cast aluminum with Corro-free epoxy powder coat
• Lens – heat- and impact-resistant glass
• Gaskets – silicone
• External hardware – stainless steel
• Factory sealed, no external seals required