Conduit trapeze supports
The versatile z-shaped design of the B-Line series conduit trapeze support allows for quicker installation and support of multiple sizes
of conduit, MC/AC cable, cable tray and other accessories, such as electrical boxes.
The solution installs up to 50% quicker than traditional strut
trapeze, and the conduit holes automatically align conduits
across the trapeze.
Compared to traditional strut trapeze solutions, the B-Line series conduit trapeze support solution eliminates the need for conduit clamps at every support location; the result is a part reduction
of up 75%.
Most configurations exceed maximum load ratings defined by
UL/NEC requirements; UL listed for US and Canada.
Installation savings
- Up to 50% quicker installation than traditional strut trapeze
- Conduit holes automatically align conduits across trapeze
- B-Line series SLN split lock nut provides additional time savings by attaching at any point along the all threaded rod
Material savings
- Fewer components when compared to strut
trapeze - Eliminates the need for conduit clamps at every
support location
- Flange accommodates 1⁄2" or 3⁄8" ATR or bolts;
no washers required at the hanger locations - No special tools required
Conduit trapeze support samples
Complete the request form to receive your complimentary product sample.
B-Line series conduit trapeze support design features
- Unique Z design for added rigidity and strength
- Flange accommodates 1/2” or 3/8” ATR or bolts
- May be mounted directly to concrete decking or other structures
- Standard hole patterns make it easy to stack for multiple tiers, or splice end to end
- Conduit clamps can be attached directly to either flange if needed
- Flange holes provide multiple options for hanger rods, mounting hardware and other accessories
- Overhang/cantilever option allows improved load ratings (i.e. 24" loads with 36" capacity)
B-Line series conduit trapeze support case study
Learn why a contractor changes his trapeze hanger habits after using the B-Line series conduit trapeze support.
B-Line series conduit trapeze support specifications
- UL listed for US and Canada
- Most configurations exceed maximum load ratings defined by UL/NEC requirements
Three sizes
- Up to 1-1/4" EMT, holds 6 conduits per foot
- Up to 2" EMT / Rigid pipe, holds 4 conduits per foot
- Up to 4" EMT / Rigid pipe, holds 2 conduits per foot
Versatility
- Available in 12" to 120" lengths in 6-inch increments
- Hole pattern repeats every 6 inches
- Longer sections can be cut to desired length
Finishes
- Standard finish is pre-galvanized
- Stainless steel and painted finishes made to order
BCTS1 series
- 11⁄4" EMT / 1" rigid maximum
- 6 conduit holes per foot
- Hanger rod spacing loads: safety factor of 3
- Evenly distributed maximum load
- 12” (305 mm) is 500 lbs. (2.21kN)
- 24" (610mm) is 450 lbs. (2.00kN)
- 36" (914mm) is 350 lbs. (1.55kN)
- 12” (305 mm) is 500 lbs. (2.21kN)
BCTS2 series
- 2" EMT / 2" rigid maximum
- 4 conduit holes per foot
- Hanger rod spacing loads: safety factor of 3
- Evenly distributed maximum load
- 12” (305 mm) is 500 lbs. (2.21kN)
- 24" (610mm) is 400 lbs. (1.78kN)
- 36" (914mm) is 300 lbs. (1.33kN)
- 12” (305 mm) is 500 lbs. (2.21kN)
BCTS3 series
- 4" EMT / 4" rigid maximum
- 2 conduit holes per foot
- Hanger rod spacing loads: safety factor of 3
- Evenly distributed maximum load
- 12” (305 mm) is 500 lbs. (2.21kN)”
- 24" (610mm) is 800 lbs. (3.56kN)
- 36" (914mm) is 750 lbs. (3.33kN)
- 12” (305 mm) is 500 lbs. (2.21kN)”
Download CAD drawings for Conduit Trapeze Supports
Eaton's CoSPEC Specifier Center is your one-stop, comprehensive resource for CAD, BIM, PDMS, and graphical design content. Select, view, and download design content in over 100 different formats.
产品通知
图纸
宣传册
应用程序说明
目录
简报
计算器与规格工具
bdeSendEmail
B-Line series conduit trapeze support
Learn how you can save time and materials on your next installation
