50W-70W HPS – Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
200W-400W with glass refractor – Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
IEC
Zone 2 Ex nR IIC (200W-400W only)
UL standards
UL844 – Hazardous (Classified) Locations
UL1598 – Luminaires
UL1598A – Marine Locations
CSA standard
C22.2 No. 137
IEC standard
60079-15
Design features
Compact, lightweight design is ideal for medium and low mounting heights
Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion
Seven mounting arrangements to suit any lighting layout – pendant, flexible pendant, ceiling, wall bracket, angle stanchion, straight stanchion, and quad mount
Wide range of light sources and wattages to meet specifiers' needs
Hinged ballast housing for ease of installation and maintenance
Wide choice of photometric distributions; glass globes, refractors and compact refractors available for all wattage luminaires
All luminaires are designed to perform in a 40°C ambient temperature; selected luminaires are suitable for ambient temperatures up to 65°C
Superior gasketing seals between the mounting module, housing and optical assembly for optimum performance in wet and corrosive environments
Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation
Low ambient capability to (-40°C)
Dome and 30° angle reflectors made of bright white Krydon material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware; will not chip, peel, dent, rust or corrode
Grounding wire for safety
High power factor ballasts (min P.F. 90%) and available in a variety of voltages to meet local area requirements
Mogul base porcelain lamp socket
Standard materials
Ballast housings and mountings – copper-free aluminum with epoxy powder coat
Exterior hardware – stainless steel
Reflectors (dome and angle) – Krydon fiberglass-reinforced polyester material
Globes – heat and impact-resistant internally fluted glass
Refractors – glass (50-175W); plastic (50- 100W), for non-hazardous applications