Eaton’s fluid purifier systems remove free, emulsified and dissolved water, free and dissolved gases, and solid contaminants to increase reliability, life, and efficiency of systems. They have been developed for different viscosity ranges, from transformer to heavy gear lubricating oils. The mobile fluid cleaning systems in the IFPM series are available in two standard sizes with flow rates of 7.9 gal/min (30 l/min) and 18.5 gal/min (70 l/min). The IFPM fluid purifier systems are fully automated, PLC-controlled compact enough for use in confined areas. The standard installed water sensor WSPS 05 allows a permanent control of the water saturation of the fluid.
Hydraulic filter elements
01.E Pressure
Hydraulic & Lubrication filters
HP3
Hydraulic filtration systems
IFPM 33
Hydraulic filtration systems
US
inlet connection: | 1 ¼“ SAE-flange 3000 PSI |
outlet connection: | 1 ¼“ SAE-flange 3000 PSI |
circulation flow rate:* | 18.9 GPM (50 Hz) / 22.6 GPM (60 Hz) |
operating vacuum: | -8.7 PSI (-60 kPa) |
heater power: | supply voltage A + E: 6000 Watt/400V supply voltage B: 6000 Watt/460V |
filter type: | NF 631 |
seal material: | Viton (FPM) |
viscosity: | 56…3200 SUS |
dewatering rate:** | 14 gal./day |
protection class: | IP54 |
ambient temperature: | +32°F to +100°F |
fluid temperature: | +50°F to +176°F |
external protection: | 25 A |