• UL1598A – Luminaires for Marine Vessels
• UL924 – Emergency Lighting Equipment
• Conforms to IP52 (FDA series only)
• Conforms to IP20 (FRD series only)
• Marine Inside Drip Proof Type (FDA series only)
• Marine Inside Type (FRD series only)
• ABS
• B-15 fire rating, when integrated with B-15 fire rated ceiling and properly insulated (FRD series only)

• Custom designed for 300mm continuous linear plank ceiling systems
• Parallel or perpendicular mounting using the same luminaire
• No trim kit or additional hardware required
• Corrosion-resistant housing
• Multi-voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations
• Low profile depth allows for installation in constricted ceiling voids
• Self-retained, spring loaded lens frame
• Optional pre-wired through feed terminal blocks
• 2 foot (600mm) and 4 foot (1200mm) models
• Filter tube options allow colored lamps to operate on a separate circuit for darken ship mode
• 3-lamp models are provided with two ballasts for independent switching or color effects
• Parabolic louver option for glare reduction
• Optional self-contained emergency battery back-up ballasts
• Optional long life T5 lamps available upon request (contact factory)

FDA:

• No trim kit or additional hardware required
• Multi-voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations
• 2 ft. (600mm) or 4 ft. (1200mm) models
• Filter tube options allow colored lamps to operate on a separate circuit for darken ship mode
• 3-lamp models are provided with two ballasts for independent switching or color effects
• Optional self-contained emergency battery back-up ballasts with test switch
• Optional long life T5 lamps available upon request (contact factory)

• Housing – FRD: galvanized steel with an electrostatically applied polyester powder coat finish; FDA: cold rolled steel with polyester powder coat finish
• Lens – flat prismatic DR acrylic