IQ 100/200 series

IQ 130/140/150

• Compact design allows meters to fit into a standard ANSI or IEC cutout on a panelboard or other electrical equipment and fit easily into retrofit applications.
• Realtime information about critical power parameters can be measured and displayed with a sampling rate of 400 samples per cycle.
• Designed to integrate into Eaton’s Power Xpert Architecture where meters, gateways, and monitoring devices collaborate to create a unified Web-based view of the end-to-end power and facilities infrastructure.
• Offering Modbus TCP as a communications option, allowing the meter to be directly monitored via Power Xpert Software or third-party monitoring solutions without a gateway.
• Designed to accommodate firmware upgrades and capabilities to keep equipment up-to-date.
• The meter can be programmed via menus and buttons on the display or remotely configured using Eaton Configuration software, which is provided with the meter for easy set up.
• Large, bright red, three-line LED display with each line more than a half-inch tall makes display very easy to read, even if the meter is installed at a height or distance.

IQ 150S/250S

• Self-enclosed, these meters are an ideal solution for surface mounting next to a selected piece of equipment for energy monitoring.
• NEMA 12 enclosure with a large, easy-to-read faceplate, consistent with other Eaton meter models, designed with ‘knockouts’ for easy installation.
• Ethernet communications option for either wired or wireless setup allowing for additional ease of installation and integration into existing networks.
• Available data and alarm recording for historical records/trending.
• Integrate into Eaton’s Power Xpert Architecture for a holistic system-level view.

IQ 250/260

• Suited for primary revenue metering, and sub-metering applications, for high-end accuracy with the ability to sample at more than 400 samples per cycle and meeting ANSI C12.20 standards for accuracy of 0.2%.
• Traceable KYZ watt-hour test pulse (used with a watt-hour pulse recorder or totalizer) allows you to verify the accuracy of your meter and, in turn, the accuracy of billing from the utility company and to internal customers.
• Open Modbus protocol is used to communicate with Eaton or third-party platforms such as building management system, power management system, or Eaton's Power Xpert® Gateway for easy Web-based monitoring.
• Optional data logging to guard against loss of historical data.
• Two auto-detecting slots that accept any mix of four optional I/O cards, analog and digital allow the user to upgrade the meter with currently developed upgrades or even metering features yet to be conceived.
• Designed to integrate into Eaton’s Power Xpert Architecture where meters, gateways, and monitoring devices collaborate to create a unified Web-based view of the end-to-end power and facilities infrastructure.
• Large, bright red, always visual three-line LED display provides a display that is easier to read than traditional, LCD back-lit. 
• The meter can be programmed via menus and buttons on the display or remotely configured using Eaton Configuration software, which is provided with the meter for easy set up.