Class I, Division 1, Groups B (with suffix GB), C, D
Class I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA
100W max. – paint spray suitability
175W max. – Class II, Class III
UL standards
UL844 – Hazardous (Classified) Locations
UL1598 – Luminaires
UL1598A – Marine Locations
CSA standard
C22.2 No. 137
Design features
Luminaire is factory wired; power is fed through wireless connection block which serves as a mechanical seal between conduit and ballast compartments, eliminating the need for an external, field installed seal; the result is a fast, easy installation
Dome and 30° angle reflectors made of Krydon material – won't rust, corrode, dent, chip or peel (order separately)
High bay reflectors of Alzak aluminum for high wattage applications
Internally fluted glass globes reduce glare and provide comfortable viewing light
Wide range of light sources and wattages to meet specific lighting needs – 50-400W high pressure sodium (HPS); 70-400W metal halide (MH)
High power factor (90%+) ballasts reduce power costs – allow more luminaires per circuit
Four mounting arrangements to suit any lighting layout – pendant, ceiling, wall bracket and stanchion
Paint spray booth suitability on 50-100W luminaires provides efficient, economical HID lighting for areas where paint residue may accumulate on luminaires
Elevated ambient capability permits reliable operation at high ambient temperature; selected luminaires are suitable for ambient temperature up to 75°C
Integral ballasts – separate ballasts are not required; lowest installed cost
Factory sealed, porcelain, mogul base socket
Standard materials
Mounting modules, cover, ballast housing, guard, globe ring – copper-free aluminum with epoxy powder coat
Globe – heat- and impact-resistant glass
Exterior hardware – stainless steel
Lamp socket – porcelain with stainless steel screw shell
Reflectors – dome and angle: Krydon fiberglass-reinforced polyester material; high bay: Alzak aluminum