UL and cUL Listed for use with 1/2” to 2” Eaton’s Crouse-Hinds series sealing fittings only
Design features
Installs a reliable seal in five minutes – every time
Hardens to a dense, strong mass that is suitable for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications
Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the need for measuring before mixing
Packaged with a screw-on nozzle for accurate dispensing
Expands in the sealing fitting, eliminating the need to separate the individual conductors with Chico X fiber
Chico X fiber dams are not required in horizontal applications, reducing installation times
Completely hardens in 20 minutes, simplifying use for OEMs
Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings; all ice crystals must be removed from inside the conduit seal before dispensing Chico SpeedSeal compound; the compound should be kept above 10°C (50°F) and below 85°F (29°C) prior to mixing; the sealing fitting must be kept at or above 4°C (40°F) during the 4 to 10 minute expansion/gel time of the compound