• 200A maximum rating
• 30A per output (100A per output connector)
• Maximum of 12 relays or 32 fuses, or various combinations thereof (unique design configurations may be required)

• Housing and connector cavities: UL 94 V-0 rated thermoplastic
• Internal power grid: tin-plated copper
• CAN circuit board: conformally coated

• –40°F (-40°C) to 185°F (85°C)

• IP66 compliant

• 60 in-lbs brass compression limiters
• 200 to 300 in-lbs with stainless steel compression limiters

Output: Standard Eaton 32006 VEC connectors

• 8-way, colored/keyed, sealed (IP66 with wire seals & plugs) connectors
• 30A maximum per terminal (100A per connector)
• Accepts Delphi Metri-Pack^® 280 Series terminals (tanged/tangless)

Input: Studded or Connectorized

• Studded input option: Supports two M8 input power studs for DC power into the VEC power grid (100A maximum per stud)
• Connectorized: Accepts up to two Eaton 32004 VEC input connectors (two terminals each, colored/keyed, sealed connectors)
• 60A maximum per terminal, providing power to the VEC Power Grid; uses Delphi Metri-Pack 800 series terminals

Output

• Delphi Metri-Pack 280 Series terminals (sealed/unsealed and tanged/tangless)
• Delphi Metri-Pack 280 Series cavity plugs are installed where wires are not used

Wire Sizes

• With wire seals: #12-22 AWG (0.35-5.0mm²)
• Without wire seals: #10-22 AWG (0.35-5.0mm²)

Input

• Delphi Metri-Pack 800 Series terminals (sealed/unsealed)

Wire Sizes

• With wire seals: #10-14 AWG (2.0-8.0mm²)
• Without wire seals: #8-14 AWG (2.0-8.0mm²)

• Uses AMP SSC 12-position sealed connector
• CAN connector provides CAN signaling, power, ground, addressing, auxiliary relay control and reserve connections to mVEC "smart" layer

• M8 input stud: 18 FT-LBS
• Mounting: 2.5 FT-LBS