Lightning Protection Level
III and IV
SPD test class
T1 and T2
READY-TO-CONNECT
combined SPD
Core features
Protection against transient overvoltage
Surge protection devices of type 1/2 are often used where customers have a lightning protection system installed. Usually when an external lightning protection system is installed, an internal lightning protection system is also required.
A combination of T1 and T2 devices are suitable for a wide range of surge protection and offer in this case the best solution.
A combination of T1 and T2 devices are suitable for a wide range of surge protection and offer in this case the best solution.
Suitable for a wide range of surge protection
Eaton's SPBT12 is a combined type 1 and type 2 surge protection device. It is the most common installed device, designed for all low voltage electrical installations.
Installed in each electrical switchboard the SPBT12 helps to prevent the spread of overvoltage and protect various loads.
Reduces effect of overvoltages
The installation of surge protection devices is intended to ensure voltage limitation in accordance with the insulation coordination. This avoids dangerous sparking and the resulting fires.
Overvoltage protection devices must be installed to reduce the effects of overvoltages. This applies to the electrical systems of all buildings from residential homes up to public and telecommunications facilities.
Overvoltage protection devices must be installed to reduce the effects of overvoltages. This applies to the electrical systems of all buildings from residential homes up to public and telecommunications facilities.
Specifications
SPBT12 xPole Surge Protection
Discover more about SPBT12 models and specifications!
Please download Quick Selection Guide of Circuit Protection & Control Products.
Download Links
Send email
